Nylicon Flexible Gear Couplings - Type 600

Type 600, are available in three sizes and are ideal for small power drives with bores sizes up to 55mm or 2.2in diameter and a basic rated torque up to 463 Nm or 4098 lb in.  

Thermosetting plastic sleeves provide non conductive assemblies.  Staggered internal teeth ensure uniform loading and an internal central buffer ring between the two hubs promotes axial location giving protection to the gear teeth.

They compensate for all types of shaft misalignment and allow a small amount of end float.  Nylicon couplings are easy to assemble and require no maintenance giving low cost reliable service under the most arduous conditions of weather, atmospheric pollution or humidity.

Product Specifications
Bore Sizes:	Up to 55 mm or 2.2 in.
Rated Torque:	Up to 463 Nm or 4,098 Lb. In.

Flexible Cone Ring Couplings - Types 611, 612, 613, 614

Types 611, 612, 613, 614 are available with bore sizes up to 355mm or 14in diameter and a basic rated torque up to 188700 Nm or 1,670,000 lb in.  

They accommodate all types of shaft misalignment met in normal operation, being a development of the old pin and bush design which it resembles in simplicity and ease of dismantling.  It differs fundamentally in the way in which the resilient material behaves by substituting the parallel bush with a series of rubber rings of conical section.  This provides greatly improved torsional flexibility together with a limited freedom of axial movement of one connected shaft relative to the other.

Two options are available, Medium Duty and Heavy Duty.   Medium duty couplings (types 612 and 614) are identical to heavy duty couplings (types 611 and 613) except that they are supplied with only half the standard number of pin and ring assemblies.  This enables a useful cost saving to be made when the size of the coupling is determined by the shaft diameter rather than the coupling's torque capacity.

Flexible Cone Ring couplings are also available with taper bushes (types 613 and 614) with bore sizes up to 125mm or 5in diameter, providing ease of assembly and dismantling together with flexibility to change shaft sizes by changing only the taper bushes.

Product Specifications
Bore Sizes:	Up to 355 mm or 14 in.
Rated Torque:	Up to 188,700 Nm or 1,670,000 Lb. In.

Gear Couplings - Types GC02, GC05, G/GF32, G/GF52, G/GF20

A torsionally rigid, lubricated design that offers high torque capacity, application versatility, and where high torque loads exist or shaft diameters exceed 100mm (4.00in), the lowest initial cost. Available in 28 sizes, and all featuring triple-crowned teeth, Textron Power Transmission gear couplings offer the highest torque ratings (over 8 million Nm or 70 million lb in) and the largest bore capacities (up to 1025 mm or 40.35 in) in the industry.

Type GC02 & GC05 Continuous Sleeve Couplings - Features a one-piece, low profile sleeve encompassing the hubs. Economical an compact. Available in both close coupled and floating shaft models.

Type G/GF32 Spacer Coupling - For pumps and compressor applications, probide ease of servicing connected equipment.

Type G/GF52 Floating Shaft Coupling - Used when distance between equipment is too great for spacer couplings. 2 single engagement couplings with interconnecting shaft. Also available for vertical mounting.

Type G/GF20 Close - Coupled Double Engagement Coupling - Design with 2 flex halves to accommodate both offset and angular misalignment. Also available for vertical mounting.

Product Specifications
Bore Sizes:	Up to 1025 mm or 40.35 in
Rated Torque:	Over 8,000,000 Nm or 70,000,000 Lb. In.

Grid Type Couplings - Types T10, T20, T31, T35, T50

A general purpose, lubricated design that combines the economy andd high torque capacity of a gear coupling with the torsional flexibility of an elastomer coupling. Backed by a 5-year lubrication warranty, Textron Power Transmission Grid couplings require no periodic maintenance when lubricated with Textron LTG (Long Term Grease) at installation. Featuring 25 sizes, Grid couplings can accommodate torque loads of 932,000 Nm (8,248,300 lb in) and shaft diameters of 508 millimeters (20 in).

Type T10 Close Coupled - A double flexing, close-coupled design for use in four bearing systems. Features a horizontally split cover which allows for gird replacement without the movement of the connected equipment.

Type T20 Close Coupled Coupling - A double flexing design featuring a vertically split steel cover. Ideal for higher running speeds.

Type T31 Full Spacer - Complete center section drops out for easy service of connected equipment bearings and seals. Ideal for pump applications.

Type T35 Half Spacer Coupling - An economical spacer design for easy service of connected equipment bearings and seals. Ideal for pump applications.

Type T50 Floating Shaft Coupling - Double piloted design for connecting equipment where the distance between shafts is too large for a spacer type coupling.

Product Specifications
Bore Sizes:	Up to 508 mm or 20 In.
Rated Torque:	Up to 932,000 Nm or 8,248,200 Lb. In.

Flexiwrap Elastomer Couplings - Types R10, R31, R35

A torsionally soft, non-lubricated design that offers quick and easy installation and replacement. Flexiwrap offers the simplest, most cost effective solution for low to moderate connections.

Type R10 Close Coupled Couplings - A double flexing close coupled design for use in four bearing systems. Features a one piece axial cover with flexible element which allows for replacement without movement of connected equipment.

Type R31 Full Spacer Coupling - Complete center section drops out for easy service of connected equipment bearings and seals. Ideal for pump applications

Type R35 Half Spacer coupling - An economical spacer design for easy service of connected equipment bearings and seals. Ideal for pump applications.

Product Specifications
Bore Sizes:	Up to 186 mm or 7.25 in
Rated Torque:	Up to 15,000 Nm or 126,000 Lb. In.